Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
16
Chrono Trigger Modification / Re: Wall bug in Schala Edition
« on: November 01, 2022, 12:49:33 pm »
If you can run a python script, you can use the new attachment in my last post. (I used ".txt" in the name to upload it here; you can rename it ".py".)
It will rename a character in the save slot you choose. Run it many times to change more than one character's name.
It will rename a character in the save slot you choose. Run it many times to change more than one character's name.
17
Chrono Trigger Modification / Re: Wall bug in Schala Edition
« on: October 23, 2022, 05:10:13 pm »
Editing .srm is a little complicated due to the checksum at the end.
The letters are here: https://bisqwit.iki.fi/jutut/ctcset.html ("A0 to FF")
and the .srm layout is here: https://datacrystal.romhacking.net/wiki/Chrono_Trigger:RAM_map
For Robo's name, you can change five bytes starting at 0x5C2 for the first save slot (or a later offset for another save slot). ("Robo" is spelled "B1 C8 BB C8 00" in my .srm.)
You'll need to update the checksum at the end, 0x1FF0. I found code here which does it: https://github.com/mikearnos/snessum/blob/master/snessum.c#L145
I will try to write python which will do the job. I will edit later...
...edit: a script attached. It's not very well-written; I'm not a programmer. But I think it works.
The letters are here: https://bisqwit.iki.fi/jutut/ctcset.html ("A0 to FF")
and the .srm layout is here: https://datacrystal.romhacking.net/wiki/Chrono_Trigger:RAM_map
For Robo's name, you can change five bytes starting at 0x5C2 for the first save slot (or a later offset for another save slot). ("Robo" is spelled "B1 C8 BB C8 00" in my .srm.)
You'll need to update the checksum at the end, 0x1FF0. I found code here which does it: https://github.com/mikearnos/snessum/blob/master/snessum.c#L145
I will try to write python which will do the job. I will edit later...
...edit: a script attached. It's not very well-written; I'm not a programmer. But I think it works.
18
Chrono Trigger Modification / Re: temporal flux nds version? it's possible??
« on: September 07, 2022, 09:36:26 am »
we are waiting for you to develop it! :-)
19
Characters, Plot, and Themes / Re: A couple of questions regarding the Guardia line
« on: August 12, 2022, 06:05:06 pm »
I guess:
1) You take on the name when you join the royal family. Sometimes the lineage passes through a princess, sometimes a prince? (Also, I think in Lucca's demonstration, the queens were just placeholders for several ancestors male or female, shown female to draw the most obvious line between Leene and Nadia)
2) Rule can pass on to the next generation before death, or optionally skip generations?
1) You take on the name when you join the royal family. Sometimes the lineage passes through a princess, sometimes a prince? (Also, I think in Lucca's demonstration, the queens were just placeholders for several ancestors male or female, shown female to draw the most obvious line between Leene and Nadia)
2) Rule can pass on to the next generation before death, or optionally skip generations?
20
Chrono Trigger Modification / Re: Chrono Trigger extra editing documents miscellaneous data
« on: July 24, 2022, 11:14:07 pm »
Why not attach them here? I'd rather not give my email address to a generic file host for a link.
21
Chrono Cross Modification / Re: Fully reverse engineering Chrono Cross back into C code
« on: May 30, 2022, 02:41:07 pm »
Pardon me for butting in - I can just respond to your very last question even though I know nothing about reverse engineering and nothing^2 about the playstation!
I built it OK, see below. git didn't clone "data/psyq" -- looks like a pointer to another git project, or something? I don't know git/github. Anyway, I downloaded that separately and copied the contents to .ghidra/... after the extension was installed.
Ghidra appears to have successfully analyzed SLUS_010.41 and SLUS_010.80 for me. (Language "PSX:LE:32:default:default")
0x4e868 (really 0x8004e868 for me) looks OK to me... but I don't know what I'm supposed to see hah. Screenshot attached.
This warning dialog appeared after analysis, but I think the extension is saying "warning" when it's really just info:
All of this said, I can't proceed from here; I've hardly used Ghidra before. I can't be of any help except to maybe provide you a working ghidra extension if that's needed..?
I built it OK, see below. git didn't clone "data/psyq" -- looks like a pointer to another git project, or something? I don't know git/github. Anyway, I downloaded that separately and copied the contents to .ghidra/... after the extension was installed.
Code: [Select]
Working Directory: /home/user/git/ghidra_psx_ldr
Gradle user home: /home/user/.gradle
Gradle Distribution: Local installation at /home/user/Downloads/gradle-7.4.2
Gradle Version: 7.4.2
Java Home: /usr/lib/jvm/java-17-openjdk-amd64
JVM Arguments: None
Program Arguments: -PGHIDRA_INSTALL_DIR=/home/user/ghidra_10.1.4_PUBLIC
Build Scans Enabled: false
Offline Mode Enabled: true
Gradle Tasks: <run default tasks>
> Task :copyDependencies NO-SOURCE
> Task :compileJava
Note: /home/user/git/ghidra_psx_ldr/src/main/java/ghidra/app/plugin/processors/sleigh/PcodeEmit.java uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
> Task :processResources
> Task :classes
> Task :indexHelp
> Task :buildHelp
INFO Using log config file: jar:file:/home/user/ghidra_10.1.4_PUBLIC/Ghidra/Framework/Generic/lib/Generic.jar!/generic.log4j.xml (LoggingInitialization)
INFO Using log file: /home/user/.ghidra/.ghidra_10.1.4_PUBLIC/application.log (LoggingInitialization)
[JavaHelpFilesBuilder] Generating Help Files for: [file:///home/user/git/ghidra_psx_ldr/src/main/help/help/]
[JavaHelpFilesBuilder] Generating map file: file:///home/user/git/ghidra_psx_ldr/build/help/main/help/ghidra_psx_ldr_map.xml...
[JavaHelpFilesBuilder] finished generating map file
[JavaHelpFilesBuilder] Generating TOC file: ghidra_psx_ldr_TOC.xml...
[JavaHelpFilesBuilder] finished generating TOC file
[JavaHelpFilesBuilder] Done generating help files for module: ghidra_psx_ldr
> Task :jar
> Task :zipSource
> Task :buildExtension
Created task ':buildExtension' property 'archiveBaseName'.task ':buildExtension' property 'archiveExtension' in task ':buildExtension' property 'destinationDirectory'
BUILD SUCCESSFUL in 38s
7 actionable tasks: 7 executed
Ghidra appears to have successfully analyzed SLUS_010.41 and SLUS_010.80 for me. (Language "PSX:LE:32:default:default")
0x4e868 (really 0x8004e868 for me) looks OK to me... but I don't know what I'm supposed to see hah. Screenshot attached.
This warning dialog appeared after analysis, but I think the extension is saying "warning" when it's really just info:
Code: [Select]
(These messages are also written to the application log file)
Applied OBJs for LIBCD.LIB: 13/51:
0x80024BDC: BIOS_2.OBJ, 3.47 entropy
0x80010220: S_024.OBJ, 2.92 entropy
0x80010220: S_013.OBJ, 2.92 entropy
0x80011EA8: S_005.OBJ, 2.22 entropy
0x80011EA8: S_003.OBJ, 2.22 entropy
0x800236BC: S_021.OBJ, 3.41 entropy
0x80010220: S_008.OBJ, 2.92 entropy
0x80010220: S_012.OBJ, 2.92 entropy
0x80049BF0: EVENT.OBJ, 3.69 entropy
0x80011EA8: S_004.OBJ, 2.22 entropy
0x80024FB8: SYS.OBJ, 4.30 entropy
0x8002369C: S_020.OBJ, 3.41 entropy
0x800236BC: S_022.OBJ, 3.41 entropy
Applied OBJs for LIBC.LIB: 4/55:
0x80010414: MEMMOVE.OBJ, 4.09 entropy
0x80010334: ITOA.OBJ, 3.74 entropy
0x80010A94: STRTOK.OBJ, 3.68 entropy
0x80010324: A56.OBJ, 2.65 entropy
Applied OBJs for LIBDS.LIB: 7/36:
0x800236BC: D3_003.OBJ, 3.41 entropy
0x80010220: D2_001.OBJ, 2.92 entropy
0x8002369C: DSSYS_3.OBJ, 3.41 entropy
0x800236BC: D3_002.OBJ, 3.41 entropy
0x80010220: D3_004.OBJ, 2.92 entropy
0x80024FB8: D3_006.OBJ, 4.30 entropy
0x80010220: D2_003.OBJ, 2.92 entropy
Applied OBJs for LIBETC.LIB: 6/8:
0x80027AF4: INTR.OBJ, 4.31 entropy
0x800285C4: VMODE.OBJ, 2.17 entropy
0x800278E4: VSYNC.OBJ, 3.78 entropy
0x80028204: INTR_VB.OBJ, 3.91 entropy
0x80028324: INTR_DMA.OBJ, 4.39 entropy
0x80010220: PADSTOP.OBJ, 2.92 entropy
Applied OBJs for LIBSPU.LIB: 26/126:
0x8004DD70: S_SNC.OBJ, 4.00 entropy
0x8004BA54: S_M_INIT.OBJ, 3.25 entropy
0x8003FC70: S_Q.OBJ, 2.81 entropy
0x80051894: S_SRA.OBJ, 3.69 entropy
0x8004BAB4: S_SI.OBJ, 3.91 entropy
0x8004B200: S_STM.OBJ, 3.21 entropy
0x80056440: S_SIA.OBJ, 3.87 entropy
0x8004BC34: S_CB.OBJ, 3.00 entropy
0x8004B1A0: S_STSA.OBJ, 4.05 entropy
0x800516C4: S_SRMT.OBJ, 4.38 entropy
0x80051D64: S_CRWA.OBJ, 4.26 entropy
0x80051F14: S_GRMDT.OBJ, 2.77 entropy
0x80029574: S_M_UTIL.OBJ, 3.85 entropy
0x80029474: S_DCB.OBJ, 2.96 entropy
0x8004BC64: S_R.OBJ, 4.10 entropy
0x8004BBF4: S_SIC.OBJ, 3.50 entropy
0x80051F14: S_GRMFB.OBJ, 2.77 entropy
0x800287D4: S_INI.OBJ, 3.70 entropy
0x800287B4: S_I.OBJ, 3.25 entropy
0x8004DDC0: S_GVEX.OBJ, 3.04 entropy
0x8004DDE0: S_SRMD.OBJ, 2.82 entropy
0x80051F14: S_GRMT.OBJ, 2.77 entropy
0x80028934: SPU.OBJ, 4.40 entropy
0x8003DD34: S_GR.OBJ, 2.96 entropy
0x8004BC64: S_W.OBJ, 4.10 entropy
0x8004BD24: S_STC.OBJ, 1.90 entropy
Applied OBJs for LIBSN.LIB: 9/44:
0x80028614: CLOSE.OBJ, 2.50 entropy
0x8002B3E0: op_vnew.obj, 2.92 entropy
0x8002AF18: SNWRITE.OBJ, 3.15 entropy
0x8002B3E0: op_vdel.obj, 2.92 entropy
0x80028624: LSEEK.OBJ, 3.59 entropy
0x8002AE38: CREAT.OBJ, 3.26 entropy
0x800285F4: OPEN.OBJ, 3.41 entropy
0x80028714: SNREAD.OBJ, 3.15 entropy
0x80028648: FSINIT.OBJ, 1.95 entropy
Applied OBJs for LIBAPI.LIB: 37/89:
0x800228D4: C57.OBJ, 2.65 entropy
0x800229B4: A53.OBJ, 2.65 entropy
0x80022CD4: A66.OBJ, 2.65 entropy
0x800229F4: A91.OBJ, 2.65 entropy
0x80051F04: A10.OBJ, 2.52 entropy
0x80022964: A36.OBJ, 2.22 entropy
0x800281D4: A23.OBJ, 2.65 entropy
0x800228F4: C73.OBJ, 2.65 entropy
0x80022904: A07.OBJ, 2.65 entropy
0x80022934: A11.OBJ, 2.65 entropy
0x800229C4: A54.OBJ, 2.65 entropy
0x800281E4: A24.OBJ, 2.65 entropy
0x80022974: A37.OBJ, 2.22 entropy
0x80022FF4: A19.OBJ, 2.65 entropy
0x80022954: A32.OBJ, 2.65 entropy
0x800229D4: A67.OBJ, 2.65 entropy
0x80022A14: L03.OBJ, 2.65 entropy
0x80022944: A12.OBJ, 2.65 entropy
0x80022924: A09.OBJ, 2.52 entropy
0x800281F4: A25.OBJ, 2.65 entropy
0x80022984: A50.OBJ, 2.65 entropy
0x80022A24: L10.OBJ, 2.52 entropy
0x80023014: A21.OBJ, 2.65 entropy
0x80022994: A51.OBJ, 2.65 entropy
0x80023004: A20.OBJ, 2.65 entropy
0x80023024: PATCH.OBJ, 3.21 entropy
0x80018D34: C112.OBJ, 2.65 entropy
0x80022FE4: A18.OBJ, 2.65 entropy
0x800229E4: A81.OBJ, 2.65 entropy
0x80022A04: L02.OBJ, 2.65 entropy
0x800230C4: CHCLRPAD.OBJ, 3.04 entropy
0x8004B8E4: COUNTER.OBJ, 4.15 entropy
0x80022914: A08.OBJ, 2.52 entropy
0x80022A34: FIRST.OBJ, 4.57 entropy
0x8003FCF0: A13.OBJ, 2.65 entropy
0x800229A4: A52.OBJ, 2.65 entropy
0x800228E4: C68.OBJ, 2.65 entropy
Applied OBJs for LIBMATH.LIB: 4/59:
0x80018694: SQRT.OBJ, 4.21 entropy
0x800187D4: GEDF2.OBJ, 4.28 entropy
0x80018C34: FIXDFSI.OBJ, 4.73 entropy
0x800188B4: ADDDF3.OBJ, 4.82 entropy
Applied OBJs for LIBC2.LIB: 21/50:
0x800107B4: SETJMP.OBJ, 3.79 entropy
0x80010994: STRCPY.OBJ, 3.41 entropy
0x80010D04: TODIGIT.OBJ, 4.01 entropy
0x80010714: PUTS.OBJ, 3.23 entropy
0x800103D4: MEMCPY.OBJ, 3.38 entropy
0x80010834: STRCAT.OBJ, 4.27 entropy
0x80010284: BZERO.OBJ, 3.29 entropy
0x80010484: MEMSET.OBJ, 3.41 entropy
0x80010220: ATOI_1.OBJ, 2.92 entropy
0x800104B4: PUTCHAR.OBJ, 3.72 entropy
0x80010774: RAND.OBJ, 3.88 entropy
0x80010374: LSEARCH.OBJ, 4.42 entropy
0x800109E4: STRLEN.OBJ, 2.61 entropy
0x80010A24: STRSTR.OBJ, 3.46 entropy
0x80010924: STRCMP.OBJ, 3.23 entropy
0x800108E4: STRCHR.OBJ, 2.80 entropy
0x80010324: EXIT.OBJ, 2.65 entropy
0x80010414: MEMMOVE.OBJ, 4.09 entropy
0x80010334: ITOA.OBJ, 3.74 entropy
0x80010A94: STRTOK.OBJ, 3.68 entropy
0x80010244: BCOPY.OBJ, 3.38 entropy
Applied OBJs for LIBSND.LIB: 7/223:
0x80010220: SSQUIT.OBJ, 2.92 entropy
0x800100E4: VM_KEY_2.OBJ, 0.99 entropy
0x80010220: SSNOFF.OBJ, 2.92 entropy
0x80022CF0: SSVM_2.OBJ, 2.22 entropy
0x800287B4: UT_ROFF.OBJ, 3.25 entropy
0x800107A4: SSVM.OBJ, 2.22 entropy
0x800100E4: DMYNOT1.OBJ, 0.99 entropy
Applied OBJs for LIBGTE.LIB: 67/535:
0x80049E50: FGO_00.OBJ, 3.67 entropy
0x800267A4: REG13.OBJ, 1.92 entropy
0x800263A4: MTX_06.OBJ, 3.78 entropy
0x80026C64: SMP_05.OBJ, 2.35 entropy
0x8002697C: REG02_1.OBJ, 1.92 entropy
0x80025724: MSC01.OBJ, 4.07 entropy
0x8003CA18: MTX_004.OBJ, 4.60 entropy
0x80026354: MTX_05.OBJ, 3.84 entropy
0x80026978: SMP_12.OBJ, 2.77 entropy
0x80026784: REG12.OBJ, 2.42 entropy
0x80026BD4: SMP_03.OBJ, 3.65 entropy
0x80026C34: SMP_04.OBJ, 3.03 entropy
0x80026C94: CMB_00.OBJ, 3.89 entropy
0x800257B4: MSC02.OBJ, 4.56 entropy
0x80025E04: MTX_003.OBJ, 4.77 entropy
0x80026764: REG11.OBJ, 3.19 entropy
0x80026D14: CMB_11.OBJ, 3.31 entropy
0x800253EC: GEO_03_3.OBJ, 4.06 entropy
0x80056480: CMB_07.OBJ, 3.82 entropy
0x80027474: RMAT_01.OBJ, 4.72 entropy
0x80026434: MTX_08.OBJ, 3.98 entropy
0x80026968: SMP_11.OBJ, 2.77 entropy
0x80049E90: SMP_01_1.OBJ, 3.57 entropy
0x80025CF4: MTX_000.OBJ, 4.58 entropy
0x80026604: MTX_12.OBJ, 3.51 entropy
0x800260E4: MTX_009.OBJ, 3.45 entropy
0x80026C78: SMP_06.OBJ, 2.77 entropy
0x80026744: REG10.OBJ, 3.19 entropy
0x80027274: RMAT_00.OBJ, 4.84 entropy
0x80027684: RATAN.OBJ, 3.92 entropy
0x80026404: MTX_07.OBJ, 2.93 entropy
0x80026D54: FGO_01.OBJ, 3.89 entropy
0x80026134: MTX_00B.OBJ, 4.56 entropy
0x80026FE4: FGO_09.OBJ, 3.85 entropy
0x800265D4: MTX_11.OBJ, 3.60 entropy
0x80025AB4: MSC06_2.OBJ, 3.56 entropy
0x80026C7C: REG02_5.OBJ, 1.92 entropy
0x800268B8: SMP_7.OBJ, 2.73 entropy
0x80026634: REG03_2.OBJ, 2.38 entropy
0x8002FAF0: FGO_04.OBJ, 3.43 entropy
0x80027804: PATCHGTE.OBJ, 3.71 entropy
0x8002AF30: MTX_00A.OBJ, 3.98 entropy
0x80026644: REG03_3.OBJ, 2.38 entropy
0x800265A4: MTX_10.OBJ, 3.56 entropy
0x80025A64: MSC06_1.OBJ, 3.53 entropy
0x80026624: REG03_1.OBJ, 2.38 entropy
0x8002F860: FGO_03.OBJ, 3.84 entropy
0x80025114: GEO_01.OBJ, 3.47 entropy
0x80025044: GEO_00.OBJ, 3.66 entropy
0x80049F30: SMP_01_4.OBJ, 3.79 entropy
0x80026A94: SMP_00_7.OBJ, 3.08 entropy
0x80026574: MTX_09.OBJ, 3.43 entropy
0x80049D40: MTX_04.OBJ, 4.59 entropy
0x80026BA4: SMP_02.OBJ, 3.32 entropy
0x80026B94: REG02_8.OBJ, 1.92 entropy
0x80025F94: MTX_006.OBJ, 3.76 entropy
0x80026244: MTX_03.OBJ, 4.58 entropy
0x80025C14: MSC06_5.OBJ, 4.00 entropy
0x80049F60: SMP_01_5.OBJ, 3.75 entropy
0x80025514: FOG_01.OBJ, 3.54 entropy
0x8003DD54: REG08.OBJ, 3.07 entropy
0x80025C74: MSC06_6.OBJ, 4.14 entropy
0x80026654: REG03_4.OBJ, 2.70 entropy
0x80025584: FOG_02.OBJ, 3.76 entropy
0x8002FC90: FGO_05.OBJ, 3.41 entropy
0x80025F64: MTX_005.OBJ, 3.32 entropy
0x80026734: REG09.OBJ, 1.92 entropy
Applied OBJs for LIBCARD.LIB: 16/18:
0x80018D54: C172.OBJ, 2.65 entropy
0x80018DB4: A79.OBJ, 2.65 entropy
0x80018D74: A74.OBJ, 2.65 entropy
0x80018E34: PATCH.OBJ, 3.82 entropy
0x80018D34: C112.OBJ, 2.65 entropy
0x80018D64: C173.OBJ, 2.65 entropy
0x80018DD4: A92.OBJ, 2.65 entropy
0x80018DA4: A78.OBJ, 2.65 entropy
0x80018D44: C171.OBJ, 2.65 entropy
0x80018D94: A76.OBJ, 2.65 entropy
0x80018D84: A75.OBJ, 2.65 entropy
0x80019154: END.OBJ, 2.83 entropy
0x80018DE4: A93.OBJ, 2.65 entropy
0x80019054: INIT.OBJ, 3.13 entropy
0x80018DC4: A80.OBJ, 2.65 entropy
0x80018DF4: CARD.OBJ, 3.41 entropy
Applied OBJs for LIBCOMB.LIB: 1/3:
0x800100E4: COMB_3.OBJ, 0.99 entropy
Applied OBJs for LIBPAD.LIB: 1/21:
0x800165A4: PDMAIINI.OBJ, 3.62 entropy
Applied OBJs for LIBGS.LIB: 5/167:
0x800107A4: GS_102.OBJ, 2.22 entropy
0x800107A4: GS_101.OBJ, 2.22 entropy
0x80022CF0: GS_125.OBJ, 2.22 entropy
0x80010220: GS_106.OBJ, 2.92 entropy
0x800107A4: GS_124.OBJ, 2.22 entropy
Applied OBJs for LIBGPU.LIB: 47/60:
0x800114A4: P11.OBJ, 2.67 entropy
0x80011554: P16.OBJ, 2.52 entropy
0x800119A4: P41.OBJ, 4.22 entropy
0x80011324: P03.OBJ, 4.16 entropy
0x80011424: P08.OBJ, 3.17 entropy
0x80011794: P33.OBJ, 3.94 entropy
0x800115D4: P20.OBJ, 2.43 entropy
0x80011764: P32.OBJ, 3.60 entropy
0x800112C4: P02.OBJ, 4.43 entropy
0x80011654: P24.OBJ, 2.43 entropy
0x80011534: P15.OBJ, 2.52 entropy
0x800116D4: P28.OBJ, 2.52 entropy
0x80011084: E01.OBJ, 4.17 entropy
0x80011474: P10.OBJ, 2.67 entropy
0x80011634: P23.OBJ, 2.43 entropy
0x80011894: P36.OBJ, 3.18 entropy
0x800113A4: P06.OBJ, 3.75 entropy
0x80011744: P31.OBJ, 3.87 entropy
0x80011454: P09.OBJ, 2.90 entropy
0x800112A4: P01.OBJ, 3.31 entropy
0x80011224: E04.OBJ, 3.67 entropy
0x80011594: P18.OBJ, 2.45 entropy
0x80011974: P40.OBJ, 3.23 entropy
0x80011514: P14.OBJ, 2.52 entropy
0x80010F94: E00.OBJ, 4.40 entropy
0x800116B4: P27.OBJ, 2.43 entropy
0x80011824: P35.OBJ, 3.86 entropy
0x80011384: P05.OBJ, 3.47 entropy
0x80011614: P22.OBJ, 2.52 entropy
0x80011714: P30.OBJ, 3.37 entropy
0x800115B4: P19.OBJ, 2.52 entropy
0x80011164: E03.OBJ, 4.69 entropy
0x80011264: P00.OBJ, 4.12 entropy
0x80011944: P39.OBJ, 3.49 entropy
0x80011694: P26.OBJ, 2.43 entropy
0x800114F4: P13.OBJ, 2.37 entropy
0x80011574: P17.OBJ, 2.52 entropy
0x80011364: P04.OBJ, 3.33 entropy
0x800115F4: P21.OBJ, 2.43 entropy
0x800117C4: P34.OBJ, 3.97 entropy
0x800113E4: P07.OBJ, 3.71 entropy
0x80011674: P25.OBJ, 2.43 entropy
0x800118D4: P38.OBJ, 4.41 entropy
0x80010D74: BREAK.OBJ, 4.17 entropy
0x800114D4: P12.OBJ, 2.52 entropy
0x800110F4: E02.OBJ, 4.16 entropy
0x800116F4: P29.OBJ, 3.87 entropy
Applied OBJs for 2MBYTE.OBJ: 1/1:
0x80010000: 2MBYTE.OBJ, 3.26 entropy
Applied OBJs for LIBC2.LIB: 1/50:
0x80010244: BCOPY.OBJ, 3.38 entropy
Applied OBJs for LIBSND.LIB: 2/223:
0x80010270: VM_KEY_2.OBJ, 0.99 entropy
0x80010270: DMYNOT1.OBJ, 0.99 entropy
Applied OBJs for LIBCOMB.LIB: 1/3:
0x80010270: COMB_3.OBJ, 0.99 entropy
Applied OBJs for LIBC.LIB: 1/55:
0x80010324: A56.OBJ, 2.65 entropy
Applied OBJs for LIBC2.LIB: 1/50:
0x80010324: EXIT.OBJ, 2.65 entropy
Applied OBJs for LIBC.LIB: 1/55:
0x80010334: ITOA.OBJ, 3.74 entropy
Applied OBJs for LIBC2.LIB: 1/50:
0x80010334: ITOA.OBJ, 3.74 entropy
Applied OBJs for LIBC2.LIB: 1/50:
0x80010374: LSEARCH.OBJ, 4.42 entropy
Applied OBJs for LIBSND.LIB: 1/223:
0x800107A4: SSVM.OBJ, 2.22 entropy
Applied OBJs for LIBGS.LIB: 3/167:
0x800107A4: GS_102.OBJ, 2.22 entropy
0x800107A4: GS_101.OBJ, 2.22 entropy
0x800107A4: GS_124.OBJ, 2.22 entropy
Applied OBJs for LIBC2.LIB: 1/50:
0x80010924: STRCMP.OBJ, 3.23 entropy
Applied OBJs for LIBC2.LIB: 1/50:
0x80010A24: STRSTR.OBJ, 3.46 entropy
Applied OBJs for LIBC.LIB: 1/55:
0x80010A94: STRTOK.OBJ, 3.68 entropy
Applied OBJs for LIBC2.LIB: 1/50:
0x80010A94: STRTOK.OBJ, 3.68 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80010D74: BREAK.OBJ, 4.17 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80010F94: E00.OBJ, 4.40 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80011084: E01.OBJ, 4.17 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x800110F4: E02.OBJ, 4.16 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80011164: E03.OBJ, 4.69 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80011224: E04.OBJ, 3.67 entropy
Applied OBJs for LIBGPU.LIB: 3/60:
0x80011324: P03.OBJ, 4.16 entropy
0x80011364: P04.OBJ, 3.33 entropy
0x800112C4: P02.OBJ, 4.43 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80011384: P05.OBJ, 3.47 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x800113E4: P07.OBJ, 3.71 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80011424: P08.OBJ, 3.17 entropy
Applied OBJs for LIBGPU.LIB: 2/60:
0x80011714: P30.OBJ, 3.37 entropy
0x800116F4: P29.OBJ, 3.87 entropy
Applied OBJs for LIBGPU.LIB: 2/60:
0x80011744: P31.OBJ, 3.87 entropy
0x80011764: P32.OBJ, 3.60 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80011824: P35.OBJ, 3.86 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80011894: P36.OBJ, 3.18 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80011944: P39.OBJ, 3.49 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x80011974: P40.OBJ, 3.23 entropy
Applied OBJs for LIBGPU.LIB: 1/60:
0x800119A4: P41.OBJ, 4.22 entropy
Applied OBJs for LIBMATH.LIB: 1/59:
0x80018694: SQRT.OBJ, 4.21 entropy
Applied OBJs for LIBMATH.LIB: 1/59:
0x800187D4: GEDF2.OBJ, 4.28 entropy
Applied OBJs for LIBMATH.LIB: 1/59:
0x800188B4: ADDDF3.OBJ, 4.82 entropy
Applied OBJs for LIBMATH.LIB: 1/59:
0x80018C34: FIXDFSI.OBJ, 4.73 entropy
Applied OBJs for LIBCARD.LIB: 1/18:
0x80018D44: C171.OBJ, 2.65 entropy
Applied OBJs for LIBCARD.LIB: 1/18:
0x80018D54: C172.OBJ, 2.65 entropy
Applied OBJs for LIBCARD.LIB: 1/18:
0x80018D64: C173.OBJ, 2.65 entropy
Applied OBJs for LIBCARD.LIB: 1/18:
0x80018DA4: A78.OBJ, 2.65 entropy
Applied OBJs for LIBCARD.LIB: 1/18:
0x80018DB4: A79.OBJ, 2.65 entropy
Applied OBJs for LIBCARD.LIB: 1/18:
0x80018DC4: A80.OBJ, 2.65 entropy
Applied OBJs for LIBCARD.LIB: 1/18:
0x80018DD4: A92.OBJ, 2.65 entropy
Applied OBJs for LIBCARD.LIB: 1/18:
0x80018DE4: A93.OBJ, 2.65 entropy
Applied OBJs for LIBCARD.LIB: 1/18:
0x80018DF4: CARD.OBJ, 3.41 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80022934: A11.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80022984: A50.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80022994: A51.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x800229A4: A52.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x800229C4: A54.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x800229D4: A67.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x800229E4: A81.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80022A34: FIRST.OBJ, 4.57 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80022CD4: A66.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80022FE4: A18.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80022FF4: A19.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80023004: A20.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80023014: A21.OBJ, 2.65 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x80023024: PATCH.OBJ, 3.21 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x800230C4: CHCLRPAD.OBJ, 3.04 entropy
Applied OBJs for LIBCD.LIB: 1/51:
0x8002369C: S_020.OBJ, 3.41 entropy
Applied OBJs for LIBDS.LIB: 1/36:
0x8002369C: DSSYS_3.OBJ, 3.41 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x800253EC: GEO_03_3.OBJ, 4.06 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x80025514: FOG_01.OBJ, 3.54 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x800257B4: MSC02.OBJ, 4.56 entropy
Applied OBJs for LIBGTE.LIB: 2/535:
0x80025AB4: MSC06_2.OBJ, 3.56 entropy
0x80025A64: MSC06_1.OBJ, 3.53 entropy
Applied OBJs for LIBGTE.LIB: 2/535:
0x80025C74: MSC06_6.OBJ, 4.14 entropy
0x80025C14: MSC06_5.OBJ, 4.00 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x800260E4: MTX_009.OBJ, 3.45 entropy
Applied OBJs for LIBGTE.LIB: 2/535:
0x80026AA4: SMP_11.OBJ, 2.77 entropy
0x80026A94: SMP_00_7.OBJ, 3.08 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x80026C34: SMP_04.OBJ, 3.03 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x80026FE4: FGO_09.OBJ, 3.85 entropy
Applied OBJs for LIBAPI.LIB: 1/89:
0x800281E4: A24.OBJ, 2.65 entropy
Applied OBJs for LIBSPU.LIB: 1/126:
0x80029574: S_M_UTIL.OBJ, 3.85 entropy
Applied OBJs for LIBSN.LIB: 1/44:
0x8002AE38: CREAT.OBJ, 3.26 entropy
Applied OBJs for LIBSN.LIB: 1/44:
0x8002AF18: SNWRITE.OBJ, 3.15 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x8002FAF0: FGO_04.OBJ, 3.43 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x8002FC90: FGO_05.OBJ, 3.41 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x8003DD54: REG08.OBJ, 3.07 entropy
Applied OBJs for LIBGTE.LIB: 2/535:
0x80049E50: FGO_00.OBJ, 3.67 entropy
0x80049E90: SMP_01_1.OBJ, 3.57 entropy
Applied OBJs for LIBGTE.LIB: 2/535:
0x80049F30: SMP_01_4.OBJ, 3.79 entropy
0x80049F60: SMP_01_5.OBJ, 3.75 entropy
Applied OBJs for LIBSPU.LIB: 2/126:
0x8004BC64: S_R.OBJ, 4.10 entropy
0x8004BC64: S_W.OBJ, 4.10 entropy
Applied OBJs for LIBSPU.LIB: 1/126:
0x80056440: S_SIA.OBJ, 3.87 entropy
Applied OBJs for LIBGTE.LIB: 1/535:
0x80056480: CMB_07.OBJ, 3.82 entropy
All of this said, I can't proceed from here; I've hardly used Ghidra before. I can't be of any help except to maybe provide you a working ghidra extension if that's needed..?
22
Fan Art / Re: Artworks from Deviantart and others
« on: May 25, 2022, 09:35:09 am »
Mammon machine has a cute lil face.
This art makes me realise how similar the Mammon Machine looks to Lavos(2). Maybe that was obvious to everybody else :-) Did Zeal have visions on which the design was based? Actually encountered it somehow?
This art makes me realise how similar the Mammon Machine looks to Lavos(2). Maybe that was obvious to everybody else :-) Did Zeal have visions on which the design was based? Actually encountered it somehow?
23
Chrono News / Re: Chrono Cross Remaster and Radical Dreamers Localization Announced!
« on: April 15, 2022, 04:34:16 pm »
Out of curiosity, since I haven't played it yet--
Most screenshots have that copyright text in the bottom. That's only on screenshots...right?
Most screenshots have that copyright text in the bottom. That's only on screenshots...right?
24
Chrono News / Re: Chrono Cross Remaster and Radical Dreamers Localization Announced!
« on: April 10, 2022, 10:49:39 pm »
evol shurrrge
oh god how did this get in here I am not good with computers
oh god how did this get in here I am not good with computers
25
Chrono News / Re: Rumor - Chrono Cross Remaster
« on: March 31, 2022, 11:49:34 am »https://www.instant-gaming.com/pt/9676-comprar-chrono-cross-remaster-remastered-edition-pc-jogo-epic-games/
This page has new art, attached here. It's just fan art, right? (I still stand by the sketchiness of this particular page, lol.)
26
Chrono News / Re: Chrono Cross Remaster and Radical Dreamers Localization Announced!
« on: March 30, 2022, 08:46:46 pm »27
Chrono Trigger Modification / Re: No Helmet Lucca Patch
« on: March 15, 2022, 01:00:15 pm »
Well, for what it's worth, I like the left portrait and the right sprite!
28
Chrono / Gameplay Casual Discussion / Re: Japanese Chrono Cross Twitter Character Pictures Translations
« on: February 25, 2022, 10:02:55 am »proper translation of: 生き別れの妹を捜す女格閩家, to clarify that Min Family bit
One of your kanji wasn't correct; did you transcribe it visually? I copied from the tweet itself, and it seems to match the image.
The corrected kanji is 闘. With the help of jisho.org I think it means:
"The [female] (女) martial artist (格闘家) searches for her long-lost [little?] sister"
29
General Discussion / Re: Deleting Spam Like...
« on: January 09, 2022, 08:18:39 pm »
LOL I definitely hit submit before actually translating. Prooooobably should've translated first, you never know.
30
General Discussion / Re: Deleting Spam Like...
« on: January 03, 2022, 04:44:59 pm »
спамеры приберегают свои лучшие продукты для стеганографов.